Origin	China
Brand Name	Roccoda

1)        960pcs of SMD LED per roll(5m)

2)        7.68W/50cm for any color

3)        12DC 640mA/50cm

4)        10±0.5mm LED Distance

5)        Mini Cutting Segment is 3LEDs per Cutting.

6)        Self-adhesive 3M Tapes

7)        High Output Flexible SMD light with White PCB(5060 FPC Board)

8)        Total Lm is 4times of the Normal ribbon or strips

9)        Lm Parameter(Lm/50cm): 120LM(Red), 120LM(Yellow), 90LM(Blue), 300LM(Green), and 350LM(White)

10)     130 in View Angle

11)     R, Y, B, G, W for choice

12)     5M/Roll, 8Roll/Box, Box Size:26x24x20cm

13)     NW: 5.5kg, GW: 6kg

14)     CE & RoHs Approval

Application

1)        Cove lighting

2)        Architectural lights for canopy, corridor, window, archway

3)        Backlight or edge lighting for signage

4)        DIY lights for home use

5)        Path and contour marking

6)        Decorative lights for holiday, event, show, exhibition

Safety Information

1)        The strip itself and all its components may not be mechanically stressed.

2)        Assembly must not damage or destroy conducting paths on the circuit board.

3)        Installation of LED modules (with power supplies) needs to be made with regard to all applicable.

4)        Electrical and safety standards. Only qualified personnel should be allowed to perform installations.

5)        Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.

6)        Parallel connection is highly recommended as safe electrical operation mode.

7)        Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.

8)        Please ensure that the power supply is of adapters power to operate the total load.

9)        When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.